Last Updated on 2026-06-24

This list includes devices that have been verified to work with GPSLaps and does not guarantee compliance with radio laws and regulations in the countries and regions where the devices listed here are used.

Warning

OBD2 is closely related to vehicle control, so please check the operation thoroughly in a safe place before use.

OBD2 is a function for diagnostic testing and is intended for connection of a one diagnostic device. It is not intended to connect two or more devices or to use extension or branch cables.
When using OBD2 devices, it is strongly recommended to connect one device directly to the OBD2 connector without using an extension/branch cable.

GPSLaps communicates with OBD2 devices that use the ELM327 or a compatible chip.

OBD2 devices capable of communicating via ELM327 AT commands (or OBDLink STN commands) may be compatible with GPSLaps even if they are not listed below.

Bluetooth LE

GPSLaps supports Bluetooth LE devices that use the following UUIDs: Service: 0xFFF0, Read: 0xFFF1, Write: 0xFFF2

  • OBD Solutions - OBDLink CX　※1
  • CARISTA - EVO Adapter　※1
  • vGate - vLinker FD+　※1
  • BODAC - UniCarScan UCSI-2100
  • NEXAS - NexLink OBD2/EOBD
  • Veepeak - OBDCheck BLE+
  • KUFUNG - Bluetooth Automobile Diagnosis

Bluetooth Classic(BR/EDR)

GPSLaps supports Bluetooth Classic (BR/EDR) devices that can communicate via SPP (Serial Port Profile).

  • OBD Solutions - OBDLink MX+　※1
  • OBD Solutions - OBDLink LX　※1
  • CARISTA - OBD2 Adapter
  • MAXWIN - M-OBD-V01

USB

  • OBD Solutions - OBDLink EX　※1
  • OBD Solutions - OBDLink LX　※1

※1　The devices are based on STN11xx family or compatible chips and are suitable for CAN-BUS monitor mode.