Last Updated on 2025-03-22

This list includes devices that have been verified to work with GPSLaps and does not guarantee compliance with radio laws and regulations in the countries and regions where the devices listed here are used.

Warning

OBD2 is closely related to vehicle control, so please check the operation thoroughly in a safe place before use.

OBD2 is a function for diagnostic testing and is intended for connection of a one diagnostic device. It is not intended to connect two or more devices or to use extension or branch cables.
When using OBD2 devices, it is strongly recommended to connect one device directly to the OBD2 connector without using an extension/branch cable.

GPSLaps communicates with Bluetooth devices with an ELM327 or compatible chip (communication is via SPP (Serial Port Profile) for Bluetooth BR/EDR, Service: 0xFFF0 for Bluetooth LE, Read: 0xFFF1, Write: 0xFFF2 for Bluetooth LE).

OBD2 devices that support this protocol may be able to communicate with devices other than those listed below.

Bluetooth LE

  • OBD Solutions - OBDLink CX　※1
  • CARISTA - EVO Adapter　※1
  • vGate - vLinker FD+　※1
  • BODAC - UniCarScan UCSI-2100
  • NEXAS - NexLink OBD2/EOBD
  • Veepeak - OBDCheck BLE+
  • KUFUNG - Bluetooth Automobile Diagnosis

Bluetooth BR/EDR

  • OBD Solutions - OBDLink MX+　※1
  • OBD Solutions - OBDLink LX　※1
  • CARISTA - OBD2 Adapter
  • MAXWIN - M-OBD-V01

※1　The devices are based on STN11xx family or compatible chips and are suitable for CAN-BUS monitor mode.